소식

RDF 연탄 기계의 작동 기술은 무엇입니까?

When using the biomass briquette extruder, a small amount of material should be fed evenly. First, add materials with a moisture content of >장비의 모든 다이 홀이 방전될 때까지 40%. 현재 장비의 압력, 온도 및 기타 매개변수는 정상 상태입니다. 방전에는 10분이 소요됩니다. 그런 다음 재료를 추가하십시오.<20% moisture content until the material is discharged normally. The moisture content of raw materials during the production process must be controlled within 20%. If the moisture content is too high, the molding density will be low, so the feeding speed should be reduced and the residence time should be extended; when the raw material is too dry, water should be added appropriately for lubrication. During the production process, avoid frequent starts or overload operation. When there is a sudden power outage or overload, the machine should be stopped immediately, the raw materials in the machine warehouse should be cleaned, and it can only be started after everything is normal.

 

low cost briquetting machine

 

모델 힘 용량 연탄 크기 구멍 수량
MK-550 55kw 1t/h-1.5t/h 32*32mm 36개
MK-750 75kw 1.5t/h-2t/h 32*32mm 54개
MK-900 90kw 2t/h-2.5t/h 32*32mm 72개
MK-1600 160kw 2.5t/h-3t/h 32*32mm 120개

목재 먼지 연탄 기계가 종료되면 주의해야 할 사항도 있습니다. 수분 함량이 약 50%인 젖은 재료를 준비합니다. 벌크 재료의 배출에 따라 모든 다이 구멍이 벌크 재료를 배출할 때까지 양을 작은 것에서 큰 것으로 늘립니다. 먹이를 중단하고 순서대로 진행하십시오. 중단 시간. 종료할 때 기계는 자재가 완전히 하역될 때까지 기다려야만 종료할 수 있습니다. 완전히 로드된 경우 종료하면 안 됩니다. 정지 후 남은 자재를 확인 및 청소하고, 장비 및 주변환경을 깨끗이 청소한다. 완성된 자재는 방습 및 방수 기능을 갖추어야 하며, 보관 장소는 통풍이 잘되고 건조해야 합니다.

당신은 또한 좋아할지도 모릅니다

문의 보내기